Show command

Description Displays fabric, switch, and port operational information.

Authority None

Syntax show about

alarm [option] audit broadcast chassis

cimlistener [listener_name] cimsubscription [subscription_name] config [option]

domains fabric

fdmi [port_wwn] interface

log [option] lsdb

mem [count] ns [option] pagebreak perf [option]

port [port_number] post log

setup [option] steering [domain_id] support

switch timezone topology users version

Operands about

Displays an introductory set of information about operational attributes of the switch. This operand is equivalent to the Version operand.

alarm [option]

Displays the alarm log and session display setting. If you omit [option], the command displays the last 200 alarm entries. The alarm log is cleared when the switch is reset or power cycled. [option] has the following value:

setting

Displays the status of the parameter that controls the display of alarms in the session output stream. This parameter is set using the Set Alarm command.

audit

Displays the most recent 200 records in the administrative audit log. The audit log contains configuration and administrative changes that have been made to the switch including the originating management session and IP address.

broadcast

Displays the broadcast tree information and all ports that are currently transmitting and receiving broadcast frames.

chassis

Displays chassis component status and temperature.

178 Command Line Interface