Working with device information and nicknames

Active Zone Set data window

The Active Zoneset data window, shown in Figure 23, shows the zone membership for the active zone set that resides on the fabric management switch. The active zone set is the same on all switches in the fabric

–you can confirm this by adding a fabric through another switch and comparing Active Zone Set displays. Click the Active Zoneset data window tab in the topology display (only) to open the Active Zoneset data window. Refer to ”Configured Zonesets data windows” on page 72 for information about the zone set definitions on a particular switch. Refer to ”Zoning a fabric” on page 50 for more information about zone sets and zones.

The Active Zoneset data window uses display conventions for expanding and contracting entries that are similar to the fabric tree. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the following entries:

•A zone set entry expands to show its member zones.

•A zone entry expands to show its member ports/devices.

•Ports/devices that are zoned by WWN, but no longer part of the fabric, are grayed-out.

Active Zoneset data window

Figure 23 Active Zone Set data window

Link data window

The Link data window displays information about all switch links in the fabric or selected links. This information includes the switch name, the port number at the end of each link, and the link status icons. Click the Link data window tab in the topology display to open the Link data window.