b.RADIUS Local — attempts to authenticate using the RADIUS server. If the switch can not contact the RADIUS server due to a network or some other problem, the switch will authenticate using the local password database.

12.Click Close to close the Radius Server Information dialog.

Removing a RADIUS server

When you remove a RADIUS server, you disable the management of authentication usernames and passwords over the network for that server.

Figure 11 RADIUS Server Information dialog — Remove Server tab page

To remove a RADIUS server, perform the following procedure:

1.Select Switch > Radius Servers in the faceplate display.

2.Click the Remove Server tab in the Radius Server Information dialog shown in Figure 11.

3.Select the server to be removed in server list at the top of the dialog.

4.Click Remove Server to remove the server.

5.Click Close to close the Radius Server Information dialog.