The following is an example of the Set Config Zoning command.

McDATA4GbSAN #> admin start

McDATA4GbSAN (admin) #> config edit

McDATA4GbSAN (admin-config) #> set config zoning

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the

ENTER key to accept the current value.

If you wish to terminate this process

before reaching the end of the list

press 'q' or 'Q' and the ENTER

key to

do so.

InteropAutoSave

(True /

False)

[True ]

DefaultVisibility

(All /

None)

[None ]

DefaultZone

(True /

False)

[False]

DiscardInactive

(True /

False)

[False]

Finished configuring

attributes.

 

This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command.

See also Config command, page 118