Port Statistics data window

The Port Statistics data window displays statistics about port performance. Select one or more ports in the faceplate display that you want to view statistics. Click the Port Stats data window tab to open the Port Statistics window. Table 22 describes the Port Statistics data window entries.

The Statistics drop-down list is available on the Port Statistics data window, and provides different ways to view detailed port information. Click the down arrow to open the drop-down list. Open the drop-down list and select Absolute to view the total count of statistics since the last switch or port reset. Select Rate to view the number of statistics counted per second over the polling period. Select Baseline to view the total count of statistics since the last time the baseline was set. Click Clear Baseline to set the current baseline when viewing baseline statistics. The baseline will also be set when the switch status changes from unreachable to reachable.

Table 22 Port Statistics data window entries

Entry

Description

 

 

Start Time

The beginning of the period over which the statistics apply. The

 

start time for the Absolute view is not applicable. The start time

 

for the Rate view is the beginning of polling interval. The start

 

time for the Baseline view is the last time the baseline was set.

 

 

End Time

The last time the statistics were updated on the display

 

 

Total Time

Total time period from start time to end time

 

 

Al Init

Number of times the port entered the initialization state

 

 

AL Init Error

Number of times the port entered initialization and the

 

initialization failed. Increments count when port has a sync loss

 

 

Bad Frames

Number of frames that were truncated due to a loss of sync or

 

the frame didn't end with an EOF

 

 

Class 2 Frames In

Number of class 2 frames received by this port

 

 

Class 2 Frames Out

Number of class 2 frames transmitted by this port

 

 

Class 2 Words In

Number of class 2 words received by this port

 

 

Class 2 Words Out

Number of class 2 words transmitted by this port

 

 

Class 3 Frames In

Number of class 3 frames received by this port

 

 

Class 3 Frames Out

Number of class 3 frames transmitted by this port

 

 

Class 3 Toss

Number of class 3 frames that were discarded by this port. A

 

frame can be discarded because of detection of a missing frame

 

(based on SEQ_CNT), detection of an E_D_TOV timeout,

 

receiving a reject frame, or receiving a frame on an offline port.

 

 

Class 3 Words In

Number of class 3 words received by this port

 

 

Class 3 Words Out

Number of class 3 words transmitted by this port

 

 

Decode Errors

Number of invalid transmission words detected during decoding.

 

Decoding is from the 10-bit characters and special K characters.

 

 

Ep Connects

Number of E_Port logins

 

 

FBusy

Number of class 2 and class 3 fabric busy (F_BSY) frames

 

generated by this port in response to incoming frames. This

 

usually indicates a busy condition on the fabric or N_port that is

 

preventing delivery of this frame.

 

 

96 Managing ports