HP AA-RW20A-TE manual Restoring the factory default configuration

•Configured Zoning — restores all configured zone sets, zones, and aliases in the switch’s zoning database, excluding the active zone set. Refer to ”Configuring the zoning database” on page 54 for more information.

•Configured Security — restores all security sets in the switch database. Refer to ”Securing a fabric” on page 30 for more information.

•Radius Server — restores all RADIUS Server information defined in the switch database. Refer to ”RADIUS servers” on page 25 for more information.

7.If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog prompts you to activate one of those zone sets. Click Yes. Select a zone set from the drop-down list in the Select Zone Set to be Activated dialog.

8.Click OK and view the results in the top pane of the Restore dialog.

Restoring the factory default configuration

You can restore the switch and port configuration settings to the factory default values. Select Switch > Restore Factory Defaults to restore the factory configuration on a switch. Table 17 lists the factory default switch configuration settings. Restoring the switch to the factory default configuration does not restore the account name and password settings. The most current port license will remain in effect. To restore user accounts, you must select the Reset Password File option in the maintenance menu. Refer to “Recovering a Switch Using Maintenance Mode” in the McDATA 4Gb SAN Switch for HP p-Class BladeSystem installation guide for your switch for information about maintenance mode and the maintenance menu.

Table 17 Factory default configuration settings

Setting	Value
Symbolic Name	McDATA4GbSAN
Administrative State	Online
Domain ID	97
Domain ID Lock	False
In-band Management	True
Broadcast Support	Enable
Resource Allocation Timeout (R_A_TOV)	10000 milliseconds
Interop Mode	Standard
Device Scan Enabled	True
Error Detect Timeout (E_D_TOV)	2000 milliseconds
SNMP Enabled	True
SNMP Proxy	True
IP Address	10.0.0.1
FDMI Enabled	True
FDMI HBA Entry Level	1000
Subnet Mask Address	255.0.0.0
Gateway Address	10.0.0.254
Network Discovery	Static
Remote Logging	False
Remote Logging Host Ip Address	10.0.0.254
NTP Client Enabled	False

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 87