HP AA-RW20A-TE manual CIMSubscription command

CIMSubscription command

Description Creates, edits, or removes CIM subscriptions.

Authority Admin session and a CIM Edit session.

Syntax cimsubscription

create [subscription_name] delete [subscription_name] edit [subscription_name]

Operands create [subscription_name]

Prompts you in a line-by-line fashion to create a CIM subscription with the name given by [subscription_name]. [subscription_name] can have up to 32 characters: 0—9, A—Z, a—z, _, $, ^, and -. Table 30 describes the CIM subscription configuration parameters.

Table 30 CIM Subscription configuration parameters

Parameter	Description
Name	Subscription name
FilterID	Event type for which the switch monitors and sends an indication to the CIM
	client. The event types are as follows:
	CreateComputerSystem — a switch is added to the fabric. This is the
	default.
	ModifyComputerSystem — a switch state change
	DeleteComputerSystem — a switch is removed from the fabric
	CreateFCPort — not supported
	ModifyFCPort — an FC port state change
	DeleteFCPort — not supported
EnabledState	Enable (True) or disable (False) the subscription. The default is True.
Duration	Subscription life span in seconds. The subscription life span begins when
	the subscription is created. Expired subscriptions do not send indications to
	the CIM client though they remain in the CIM database. Values can be
	1–720000. 0 indicates indefinite, which is the default.

delete [subscription_name]

Deletes the subscription given by [subscription_name] from the CIM database.

edit [subscription_name]

Opens an editing session in which you can modify the CIM subscription given by [subscription_name]. Refer to Table 30 for a description of the CIM subscription configuration parameters.

116 Command Line Interface