HP AA-RW20A-TE manual 70

Table 9 Switch data window entries (continued)

Entry	Description
Zoning Default Visibility	Zoning visibility status. Permits (All) or prevents (None)
	communication between attached devices in the absence of
	an active zone set.
Default Zone	The Default Zone parameter enables (True) or disables
	(False) communication among ports/devices that are not
	defined in the active zone set or when there is no active
	zone set. This parameter must have the same value
	throughout the fabric. If interop mode is McDATA Fabric
	Mode, the Default Zone parameter is automatically
	distributed throughout the fabric. If McDATA 4Gb SAN
	Switches are in a fabric with other M-Series directors and
	edge switches, and the interop mode is Standard/Open
	Fabric, the Default Zone parameter MUST be disabled
	(False) on the McDATA 4Gb SAN Switches for zoning to
	function properly.
Discard Inactive	Automatically removes the previously active zone set when a
	zoneset is activated on a switch
Temperature	Internal switch temperature °C
Security Auto Save	If enabled (default), the security configuration is saved to
	non-volatile memory on the switch. If disabled, the security
	file is saved only to temporary memory. The Auto Save
	feature is used when Fabric Binding is enabled. When Auto
	Save is disabled, any updates from remote switches will not
	be saved locally. If the local switch is reset, it may isolate.
Security Fabric Binding	If enabled, the expected domain ID of a switch is required
Enable	before attaching to the fabric
Fan 1 Status	Not applicable
Fan 2 Status	Not applicable
Power Supply 1 Status	Power supply 1 status
Power Supply 2 Status	Not applicable
Beacon Status	Beacon status. Switch LEDs are blinking (on) or not (off).
Broadcast Support	Broadcast support status. Broadcast support is enabled or
	disabled (default).
In-band Enabled	In-band management status. Permits (True) or prevents
	(False) a switch from being managed over a FC port.
Temperature Failure Port	Non-configurable (always enabled for this switch). All ports
Shutdown	are downed when the switch temperature exceeds the
	Failure Temperature.
Warning Temperature	Non-configurable temperature threshold (65° Celsius) above
	which a warning condition alarm is generated.
Failure Temperature	Non-configurable temperature threshold (70° Celsius) above
	which a failure condition alarm is generated.
NTP Client Enabled	Enabled or disabled. Allows for switches to synchronize their
	time a centralized server.

70 Managing switches