The following is an example of the Group Edit command:

McDATA4GbSAN (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept

the current

value. If you wish to terminate

this process before reaching the end of

the list press 'q' or 'Q' and

the ENTER key to do so.

 

 

Group Name

g1

 

 

 

 

Group Type

ISL

 

 

 

 

Group Member

10:00:00:c0:dd:00:90:a3

 

 

 

Authentication

(None / Chap)

 

[None]

chap

PrimaryHash

(MD5 / SHA-1)

 

[MD5

]

sha-1

PrimarySecret

(40 hex or 20

ASCII char value)

[

]

1234567890123456789

SecondaryHash

(MD5 / SHA-1 / None)

[None]

md5

SecondarySecret

(32 hex or 16

ASCII char value)

[

]

1234567890123456

Binding

(domain ID 97-127, 0=None)

[3

]

 

Finished configuring attributes.

To discard this configuration use the security cancel command.

The following is an example of the Group List command:

McDATA4GbSAN #> group list

Group SecuritySet

----------------

group1 (ISL)

alpha

group2 (Port) alpha

The following is an example of the Group Members command:

McDATA4GbSAN #> group members group1

Current list of members for Group: group1

----------------------------------

10:00:00:c0:dd:00:71:ed

10:00:00:c0:dd:00:72:45

10:00:00:c0:dd:00:90:ef

10:00:00:c0:dd:00:b8:b7

See also Security command, page 149Securityset command, page 152Set Config command, page 156.