setup [option]

Changes SNMP and system configuration settings. Refer to the Set Setup command.

switch [state]

Changes the administrative state for all ports on the switch to the state given by [state]. The previous Set Config Switch settings are restored after a switch reset or a reactivation of a switch configuration. [state] can be one of the following:

online

Places all ports online

offline

Places all ports offline.

diagnostics

Prepares all ports for testing.

timezone

Specifies the time zone for the switch and the workstation. The default is Universal Time (UTC) also known as Greenwich Mean Time (GMT). This operand prompts you to choose a region, then a subregion to specify the time zone.

Examples The following examples enables and disables the beacon:

McDATA4GbSAN #> set beacon on

Command succeeded.

McDATA4GbSAN $> set beacon off

Command succeeded.

See also Set Config command, page 156

Set Log command, page 166

Set Port command, page 169

Set Setup command, page 170