
Command List:
| Command Example | Description | 
| 
 | 
 | 
| archive tar /xtract source | Extracts the contents of a tar to the destination specified | 
| destination | 
 | 
| auto assign 2 to 2 | Turns on auto registration and configuration of new  | 
| button 1:1 | Assigns an  | 
| configure terminal | Enters global configuration mode | 
| copy source destination | 
 | 
| create  | Creates XML files for configuring the IP Phones | 
| 
 | Sets the default gateway that will be assigned to the DHCP clients | 
| enable | Enter privilege executive mode | 
| enable password cisco | Assigns a password to enter privilege exec mode | 
| ephone 1 | Enters and creates an ephone | 
| 
 | Enters and creates a  | 
| exit | Goes back one configuration level | 
| hostname name | Assigns a host name to the router | 
| interface fa 0/0 | Enters FastEthernet 0/0 configuration mode | 
| ip address 10.X0.0.1 | Sets the IP address on the FastEthernet 0/0 interface | 
| 255.255.255.0 | 
 | 
| ip dhcp  | Sets a range of address to be excluded from the DHCP pool | 
| 10.X0.0.1 10.X0.0.10 | 
 | 
| ip dhcp pool CMEX | Defines a DHCP pool and enters a DHCP pool mode | 
| ip  | Sets the interface where Cisco CallManager Express will listen for | 
| 2000 | skinny messages | 
| keepalive 10 | Sets the keep alive to 10 seconds | 
| line vty 0 4 | Enters line mode | 
| load  | Loads the firmware and will use it for the 7960 and 7940 IP phones | 
| login | Enables logins on vty connections | 
| mac H.H.H | Associates a physical device to an ephone | 
| 
 | Sets the maximum  | 
| 
 | Sets the maximum ephones that can be present | 
| name John Smith | Assigns a name to the  | 
| network 10.0.0.0 | Runs eigrp on all interfaces with a 10.0.0.0 network assigned to it | 
| network 10.X0.0.0 255.255.255.0 | Enters a network range and subnet mask to use to assign | 
| 
 | addresses and mask to the DHCP clients | 
| no shutdown | Enables the interface | 
| no telephony service | Clears the Call Manager Express configuration | 
| number X000 | Assigns a directory number to the  | 
| option 150 ip 10.X0.0.1 | Set the TFTP server that will be assigned to the DHCP clients | 
| password cisco | Sets a password of cisco on the vtys | 
| router eigrp 100 | Starts eigrp with an AS of 100 | 
| show flash | Shows the contents of the flash | 
| show  | Show the current configuration that is loaded and running in RAM | 
| 
 | on the router | 
| 
 | Enters the setup utility | 
| type 7960 | Assign a model of IP phone to the ephone | 
| 165 - 165 IP Telephony v1.0 Command List: | Copyright ♥ 2005, Cisco Systems, Inc. | 
