Lab 2.1.4 Resetting a 7900 Series Cisco IP Phone to Factory Defaults

Objective

Erase the current configuration from an IP phone

Equipment Requirements

Cisco IP Phone 79xx series

Inline power capable switch or non-inline power switch with power injectors

In this lab, the ACME.com Company has decided to deploy CallManager Express (CME) in the enterprise. First, the IP phones must be reset. They were used in a test lab by the network support staff and currently have various configurations. This process should be used when configuring any IP phone that could have been previously configured.

Step 1 Provide power to the switch

a.Cable the Cisco IP phone to an inline power switch using a straight-through cable OR cable the phone (with a straight-through cable) to a power module that connects to a non-inline power switch.

b.Power on the switch.

c.Which method of providing power to the IP phone was chosen? __________________________

29 - 165 IP Telephony v1.0 Lab 2.1.4

Copyright 2005, Cisco Systems, Inc.

Page 29
Image 29
Cisco Systems v1.0 manual Objective, Provide power to the switch