Cisco Systems v1.0 manual Lab 5.1.6 Customize the IP Phone Display, Objective

Lab 5.1.6 Customize the IP Phone Display

Objective

•Customize the IP Phone Display

Equipment Requirements

•Cisco CallManager Express (CME) capable router

•Inline power capable switch or non-inline power switch with power injectors

•Workstation with an Ethernet 10/100 NIC installed

•Two Cisco IP phones

•IP Telephony Table 2

This lab relies on labs 2.1.1, 2.1.2, 3.1.1, 5.1.1, and 5.1.3 being successfully completed and loaded.

In this lab the ACME.com Company wishes to customize the IP phones with the Direct Inward Dial (DID) number of the phone, the company name on the display, and a label on the line. Configure the following with IOS commands or by using the GUI.

98 - 165 IP Telephony v1.0 Lab 5.1.6 Copyright ♥ 2005, Cisco Systems, Inc.