Cisco Systems v1.0 manual Lab 3.1.1 CME Automated Phone Setup, Objectives

Lab 3.1.1 CME Automated Phone Setup

Objectives

•Identify the basic steps to automatically configure Cisco CallManager Express (CME)

•Configure two dual-line phones

•Verify the IP phones register and calls can be placed between two IP phones

Equipment Requirements

•Cisco CallManager Express (CME) capable router

•Inline power capable switch or non-in-line power switch with power injectors

•Workstation with FastEthernet 10/100 NIC installed

•Two Cisco IP phones

•Access to Table 1 IP Telephony IP Addressing and VLAN Assignment document

•Access to Table 2 IP Telephony Dial Plan Assignment document

In this lab the ACME.com Company has decided to use the setup utility to configure the Cisco CallManager Express router and phones. This lab relies on the labs 2.1.1, 2.1.2, and 2.1.3 being successfully completed. The lab uses information from Table 2 IP Telephony Dial Plan.

32 - 165 IP Telephony v1.0 Lab 3.1.1 Copyright ♥ 2005, Cisco Systems, Inc.