Lab 3.1.2 CME Manual Phone Setup

Objective

Configure IP Phones using the manual configuration process

Equipment Requirements

Cisco CallManager Express (CME) capable router with specific files for IP phone (basic CME .tar file)

Inline power capable switch or non-inline power switch with power injectors

Workstation with an Ethernet 10/100 NIC installed

One Cisco IP phone

In this lab the ACME.com Company has decided to use the manual setup process to configure the Cisco CallManager Express router and phones. Use IOS commands to achieve the following goals:

Manually configure the IP phones with an extension and connect them to the network

Assign a name to the IP phones

This lab relies on labs 2.1.1, 2.1.2, and 2.1.3 being successfully completed. The lab uses information referenced in IP Telephony Table 1 and IP Telephony Table 2.

39 - 165 IP Telephony v1.0 Lab 3.1.2

Copyright 2005, Cisco Systems, Inc.

Page 39
Image 39
Cisco Systems v1.0 manual Lab 3.1.2 CME Manual Phone Setup, Objective