Using the Auto Setup Feature
When projecting RGB signal images from a personal computer, it is possible to automatically adjust the image’s position, dot clock and phase simultaneously (only for projection of images with RGB signal inputs other than DTV format signals). Perform the operation described below if you wish to use this function.
AUTO SETUP
(Remote
Control unit)
Press the AUTO SETUP button on the remote control unit.
A u t o S e t u p
Note
•The LCD Projector detects whether the simple stand are down or up and automatically corrects keystone distortion.
•Adjusted settings are saved as is even if power is turned off.
•If the edges of the projected picture are indistinct, or if a dark picture is being projected, the automatic set up processing may stop automatically before it is complete. If this happens, project a different picture and then press the AUTO SETUP Button once more. Or, perform the following operations as indicated in the
Refer to the “Adjusting the Image Position, Dot Clock and Phase”.
Refer to the “Keystone correction function”.
42
