Panasonic PT-LC50U manual System Configuration Example, Notes on system configuration

System Configuration Example

Notes on system configuration

•Turn off the power supply of each system component before connecting any of the components.

•Read the instruction manual for each system component before connecting it.

•If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

•If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).

•It may not be possible to connect some types of personal computer.

Note

•Because each Y, PB, and PR signal is input independently, the Component signal allows for more faithful color reproduction.

•The Component signal output terminal indication will differ according to the output device (PR, PB, Y/R-Y, B-Y, Y/Cr, Cb, Y, etc.). Please read the operating instructions included with the output device.

•You need to change the input signal setting on this LCD Projector when inputting the Component signal. In this case, please refer to “Setting of the RGB/YPBPR Input Signal Selection”.

•D-sub15-BNC5 (female) Adaptor Cable (sold separately) often have BNC connectors, however a DVD output device usually has RCA jacks. In this case, you will need BNC-RCA adaptors (not included).

23