Panasonic PT-LC50U manual Canceling enlarging scanning line conversion function, and then ENTER to

Canceling enlarging (scanning line conversion) function

When a signal less than 800 X 600 dots signals is input, the LCD Projector automatically enlarges the image to 800 X 600 dots. This may cause picture quality degration. For better image, select Expansion: OFF by the following procedure. The procedure and on-screen display as shown below are based on RGB as the input signal from a personal computer.

•Setting procedure

1 Press MENU to display the menu.

2 Press or to

select “Function”,

and then ENTER to

display the screen.

Picture

White Balance

Synchronization

Function

Language

Information

3 Press or to select “Expansion”.

4 Press or to select “ON” or “OFF”.

•Select “OFF” to cancel enlarge (scanning line conversion) function.

•Select “ON” to use enlarge (scanning line conversion) function. (This is the factory setting.)

Function

RGB/YPBPR	•RGB •YPBPR
Projection Mode	•Front •Rear
Expansion	•ON	•OFF
On Screen Display	•ON	•OFF
Auto Lamp Off	•YES	•NO

Standard (Push ENTER)

53