Panasonic PT-LC50U manual Turning off the input signal display, Press MENU to display the menu

Turning off the input signal display

The function which displays the currently selected input signal on the screen can be turned off by the following procedure. Freeze displays will also be turned off.

The procedure and on-screen display as shown below are based on RGB as the input signal from a personal computer.

•Selecting procedure

1 Press MENU to display the menu.

2 Press or to select “Function”, and then ENTER to display the screen.

Picture

White Balance

Synchronization

Function

Language

Information

3 Press or to select “On Screen Display”.

4 Press or to select “ON” or “OFF”.

•Select “OFF” to turn off the input signal display function.

•Select “ON” to turn the input signal display function. The input signal will be displayed each time it is changed. (This is the factory setting.)

Function

RGB/YPBPR	•RGB •YPBPR
Projection Mode	•Front •Rear
Expansion	•ON	•OFF
On Screen Display	•ON	•OFF
Auto Lamp Off	•YES	•NO

Standard (Push ENTER)

51