Adjusting the LCD Projector projection angle
Adjusting the LCD Projection angle of the LCD Projector. When the projector is in the horizontal position, keystone correction is unnecessary and a correct image can be viewed.
■Using the simple stand While lifting up the front of the projector, pull down the simple stand located underneath the unit.
Note
The LCD Projector detects whether the Simple Stand is down or up and automatically corrects keystone distortion when the KEYSTONE Button is pressed.
Caution:
Never pick the unit up by the simple stand.
■Using the swivel stand
1 Slide the TIGHTEN Knob to | FRONT |
| |
the LOOSEN position. |
|
(Top view)
2 Adjust to the desired projection angle. If necessary, you can also tilt to the right or left.
3 Slide the TIGHTEN Knob to | FRONT |
the TIGHTEN position. |
|
(Top view)
39
