Panasonic PT-LC50U Auto Lamp Off, Press MENU to display the menu 2 Press or to select “Function”

Auto Lamp Off

The power save function operates as follows: If the projector continues projecting for 15 minutes or more while there is no input signal to be projected, the light source will shut off automatically to save power. And, the projector will enter standby mode. At the time of shipment from the factory, the Auto Lamp Off function is set YES, so that if you will not use this function, you can turn it off by the following procedure. The procedure and on-screen display as shown below are based on RGB as the input signal from a personal computer.

•Selecting procedure

1 Press MENU to display the menu.

2 Press or to select “Function”,

and then ENTER

to display the screen.

Picture

White Balance

Synchronization

Function

Language

Information

3 Press or to select “Auto Lamp Off”.

4 Press or to select “YES” or “NO”.

Function

RGB/YPBPR	•RGB •YPBPR
Projection Mode	•Front •Rear
Expansion	•ON	•OFF
On Screen Display	•ON	•OFF
Auto Lamp Off	•YES	•NO

Standard (Push ENTER)

52