ASSEMBLY/SETUP INSTRUCTIONS
WARNING
DO NOT MOVE TREADMILL OUT OF THE BOX UNTIL UNIT IS ASSEMBLED.
COLLAPSE BOX BOTTOM AND LAY SIDES DOWN BEFORE ASSEMBLY.
WHEN MOVING ASSEMBLED TREADMILL OUT OF THE BOX, MOVE IT OUT OF THE BOX ON ITS WHEELS WHILE THE DECK IS IN THE FOLDED AND LOCKED POSITION.
FAILURE TO FOLLOW THIS
PROCEDURE MAY RESULT IN
SERIOUS INJURY.
For Maximum Effectiveness and Safety,
Please Read This Owner’s Manual
Before Assembling or Using Your
New Balance 1200/1400 Treadmill.
NOTE: All location references, such as front, rear, left or right, made in these instructions are from the user position – on the Treadmill facing the Console.
Parts Box
Tools Required: (included)
Allen Wrench
Multi Hex Tool with
Phillips Screwdriver
power cord |
side cap (2)
Fastener Pack
| allen wrench |
M8 x 20mm allen bolt (6) |
|
M8 washer (2) | multi hex tool |
| |
| with phillips |
| screwdriver |
M8 curved washer (4) |
|
M4 x 6mm phillips screw (6) | safety key |
|
6
