Lab 5.1.9 Configure Paging Groups

Objective

Set up two paging groups. Each IP phone will be in a different paging group, and both paging groups will belong to yet another paging group.

Equipment Requirements

Cisco CallManager Express (CME) capable router

Inline power capable switch or non-inline power switch with power injectors

Workstation with an Ethernet 10/100 NIC installed

Two Cisco IP phones

One analog phone

This lab relies on labs 2.1.1, 2.1.2, 3.1.1, and 4.1.1 being successfully completed and access to IP Telephony Tables 1 and 2.

In this lab the ACME.com Company wishes to configure paging groups that will use the speaker feature of the IP phones. A paging group for the sales staff and a paging group for the technical support staff are required. In addition, when an emergency page is needed, all phones in the sales paging group and all phones in the tech support group should receive the emergency page.

111 - 165 IP Telephony v1.0 Lab 5.1.9

Copyright 2005, Cisco Systems, Inc.

Page 111
Image 111
Cisco Systems v1.0 manual Lab 5.1.9 Configure Paging Groups, Objective