Setting up the Projector Using
The setting procedure for each item will be explained. For the basic procedure, please refer to “Set Items” on page 23.
IP Address Setting
([1]IP Address)
Setting of IP address.
setup>1 |
|
|
IP Address |
| :192.168.150.2 |
Please Enter | :192.168.150.3 | |
(change) | 192.168.150.3 | |
Default Gateway Setting
([3]Default Gateway)
Setting default gateway.
1 | setup>3 | 1 |
| note: “0.0.0.0” means “Using no default gateway.” |
|
2Gateway Address :0.0.0.0
* | Please Enter | :192.168.150.1 |
| 2 |
| ||||
| (change) | * | ||
1Enter “1” and press the “Enter” key.
2Enter numerical value to be set and press the “Enter” key.
Display IP address after change (*).
1Enter “3” and press the “Enter” key.
2Enter numerical value to be set and press the “Enter” key.
Display gateway address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
setup>2 |
|
| 1 | |
Subnet Mask | :255.255.255.0 |
|
| |
Please Enter | :255.0.0.0 |
|
| 2 |
|
| |||
(change) | 255.0.0.0 |
| * | |
1Enter “2” and press the “Enter” key.
2Enter numerical value to be set and press the “Enter” key.
Display subnet mask after change (*).
Note
•If the values for IP Address, Subnet Mask or Gate- way of the projector have been changed via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.
User Name Setting
([4]User Name)
Carrying out security protection using user name.
setup>4 |
|
| 1 | |
User Name | : |
|
|
|
Please Enter | : |
|
| 2 |
|
| |||
(change) | * | |||
1Enter “4” and press the “Enter” key.
2Enter user name and press the “Enter” key. Display set user name (*).
Note
•User name can be up to 8 characters.
•You can input the characters below :
•In the default state, user name is not set.
-25
