Sharp PG-F325W specifications View Setting Detail List, Set Items, VView All Setting, Setup Menu

Setting up the Projector Using RS-232C or Telnet

Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end.

View Setting Detail List

([V]View All Setting)

▼SETUP MENU

---------------------------------SETUP MENU--------------------------------
[1]IP Address	[2]Subnet Mask	[3]Default Gateway
[4]User Name	[5]Password
[6]RS-232C Baud Rate [7]Projector Name		[8]DHCP Client
[A]Advanced Setup		[D]Disconnect All
[V]View All Setting	[S]Save & Quit	[Q]Quit Unchanged
setup>v			1
Model Name	: XX-XXXX
Projector Name	: XX-XXXX
MAC Address	: XX:XX:XX:XX:XX:XX
DHCP Client	: Disable
IP Address	: 192.168.150.2
Subnet Mask	: 255.255.255.0
Default Gateway	: Not Used		*
RS-232 Baud Rate	: 9600 bps
Password	: Not Required
**********(Advanced Status)**********
Data Port	: 10002
Accept IP Address	: Accept All
Auto Logout Time	: 5 minutes
Search Port	: 5006

1Enter “v” and press the “Enter” key. Display all setting values(*).

Set Items

Example: When setting IP Address (change from 192.168.150.2 to 192.168.150.3)

▼SETUP MENU

---------------------------------		SETUP MENU--------------------------------
[1]IP Address		[2]Subnet Mask	[3]Default Gateway
[4]User Name		[5]Password
[6]RS-232C Baud Rate [7]Projector Name			[8]DHCP Client
[A]Advanced Setup			[D]Disconnect All
[V]View All Setting		[S]Save & Quit	[Q]Quit Unchanged
setup>1				1
IP Address	: 192.168.150.2				*1
Please Enter	: 192.168.150.3			2
(change) —>	192.168.150.3			*2
---------------------------------		SETUP MENU--------------------------------
[1]IP Address		[2]Subnet Mask	[3]Default Gateway
[4]User Name		[5]Password
[6]RS-232C Baud Rate [7]Projector Name			[8]DHCP Client
[A]Advanced Setup			[D]Disconnect All
[V]View All Setting		[S]Save & Quit	[Q]Quit Unchanged
setup>v					3
Model Name		: XX-XXXX
Projector Name		: XX-XXXX
MAC Address		: XX:XX:XX:XX:XX:XX
DHCP Client		: Disable			*3
IP Address		: 192.168.150.3
Subnet Mask		: 255.255.255.0
Default Gateway		: Not Used
RS-232C Baud Rate : 9600 bps
Password		: Not Required
**********(Advanced Status)**********
Data Port		: 10002
Accept IP Address		: Accept All
Auto Logout Time		: 5 minutes
Search Port		: 5006

1Enter “1” (number of item to be set), and press the “Enter” key.

Display current IP address (*1).

2Enter IP address to be set and press the “En- ter” key.

Display IP address after change (*2).

3Enter “v” and press the “Enter” key to verify setting detail list.

IP address is being changed (*3).

Note

•Verification of setting detail list can be omitted.

•Setting details are not effective until they have been saved. (Page 24)

•If an invalid number is entered, an error message (“Parameter Error!”) will be displayed.

-23