Condensate pump drain installation. The condensate drain line is coiled inside the equipment, allowing you to route the condensate drain line for either top or bottom use. See the table “Piping and electrical access locations” on page 11 for more information. Use the provided grommets to properly secure and protect the condensate drain line.
Note: Comply with all local codes when installing the condensate drain line to the proper drain system.
Top routing
Bottom routing
Chiller
There are three types of chillers to which the equipment can be connected:
•APC
•Building chilled water system
•Existing dedicated chiller
na1576a
See the chiller documentation: (installation, operation, and maintenance manuals) for proper installation procedures.
CDU
See the CDU Installation manual for proper installation procedures.
Accessories and spare parts
Accessories are available for the equipment, including flexible pipe adapters, data troughs, data partitions, and height adapters for use with other APC equipment. For more information, contact APC as directed on the back cover of this manual.
Many serviceable components are available as spare parts. For more information, contact APC as directed on the back cover of this manual.
InRow RC Installation | 19 |
