Toshiba TLP-S40 Turning the power on and off, Connecting the power cord, Removing the lens cover

Models: TLP-T70M TLP-T60M TLP-S40

1 26
Download 26 pages 21.6 Kb
Page 12
Image 12

Turning the power on and off

Connecting the power cord

1 Insert the power cord connector into the AC IN socket of the projector.

2 Insert the power cord plug into a wall or other power outlet.

 

When the power cord is plugged in, the following

 

three green indicators will come on for several

 

seconds: ON, TEMP, and LAMP. Next, the ON

 

indicator will change to orange, indicating standby

 

mode.

(Supplied) Power cord connector

(Do not perform any operations while the 3 green

indicators are on.)

Removing the lens cover

Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat.

Turning the power off

1 Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.)

2 Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while. Then, the projector goes into standby mode.

When cooling lamp

During internal cooling

After cooling is completed

FAN

TEMP LAMP

ON

FAN

TEMP LAMP

ON

FAN

TEMP LAMP

ON

(Green)

(Green)

(Orange)

(Green)

(Off)

(Orange)

(Off)

(Off)

(Orange)

A

Flashing

 

B

 

 

C

 

 

 

 

 

 

 

 

A

During cooling, the LAMP indicator flashes. In this state, the power cannot be

 

turned back on. In addition, unplugging the power cord in this state will shorten

 

 

the life of the lamp.

 

After the LAMP indicator goes off, the cooling fan continues to operate for a

B

 

short while in order to expel excess internal heat. If you are in a hurry, there is

Turning the power on

Press the ON/STANDBY button.

The power turns on, and the following 3 green indicators light: ON, LAMP, and FAN. After a moment, the start- up screen appears.

Control panel

FAN TEMP LAMP ON

INPUT

ON / STANDBY

 

ZOOM +

 

MENU

VOL. -

VOL. +

AUTO

 

KEYSTONE

AUTO SET

 

ZOOM -

Remote Control

ON/

CALLSTANDBY

KEYSTONE AUTO SET

MUTE

FREEZE

RESIZE

RESIZE

OFF

INPUT

 

no problem with unplugging the power cord in this state.

 

In standby mode.

C

 

Note

The projector consumes about 6W of power in standby. We recommend you to unplug the power cord if you will not use the projector for an extended period.

PRECAUTIONS

• Before unplugging the power cord, make sure that the LAMP indicator is off. Unplugging

the power cord and cutting off the power while the projector is running or being cooled

will shorten the life of the lamp. However, please unplug the power cord if the

Operations

WARNING

Do not look into the lens during operation. Doing so could damage your vision.

CAUTION

Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object.

Notes

The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p.33 .

The first time you use the projector after purchase, after the start-up screen disappears, the Language menu is displayed p.24 .

projector locks up or acts abnormally.

• If the power cord was unplugged before cooling was complete, give the lamp sufficient

time to cool before plugging it back in. If the lamp overheats, it may fail to light, and its

lifetime will be shortened.

LCD Panels

LCD panels wear out. In order to prolong the lifetime of your LCD panel, take the following precautions.

In order to extend the lifetime of the LCD panel, always turn off the power when not in use, and make sure that the lamp is off. Keeping the lamp off is also very effective at saving electricity.

If the air filter becomes dirty and clogged, the projector’s internal temperature will rise, shortening the lifetime of the LCD panel and causing malfunctions. Clean the air filter from time to time p.39 , and replace it periodically. Contact the store where you purchased your projector, or your local Service Station for replacement air filters.

22

23

Page 12
Image 12
Toshiba TLP-S40 Turning the power on and off, Connecting the power cord, Removing the lens cover, Turning the power off

TLP-T70M, TLP-T60M, TLP-S40 specifications

Toshiba has been a prominent player in the projector market, offering a range of innovative and high-performance models suitable for various applications, from business presentations to educational settings. Among their standout products are the TLP-S40, TLP-T60M, and TLP-T70M projectors, each designed to meet differing user needs while incorporating advanced technologies.

The Toshiba TLP-S40 is designed for users seeking a compact yet powerful projector. Featuring a brightness of 2,400 ANSI lumens, this model ensures vibrant images even in well-lit environments. Its native SVGA resolution of 800 x 600 makes it ideal for basic presentations and visual content. Importantly, the TLP-S40 employs a 3LCD technology, which enhances color accuracy and delivers a richer visual experience without the issues of color wheel artifacts often seen in DLP projectors. The lightweight and portable nature of the TLP-S40 facilitates easy transportation, making it a popular choice for mobile professionals.

Moving up to the TLP-T60M, Toshiba ramps up performance and flexibility. This model offers a brightness of 3,000 ANSI lumens and an XGA resolution of 1024 x 768, catering to a broader range of presentation materials with sharper clarity. The TLP-T60M also incorporates Toshiba's proprietary “Eco” mode, which extends the lamp life significantly, allowing users to project for longer periods without frequent maintenance. The connectivity options are versatile, including HDMI, VGA, and USB ports, ensuring compatibility with a variety of devices. This projector is particularly favored in corporate environments due to its ability to present detailed graphics and videos clearly.

The TLP-T70M represents the pinnacle of this series, providing enhanced features and performance. With a brightness of 3,500 ANSI lumens, it excels in larger venues and rooms with substantial ambient light. The native WXGA resolution of 1280 x 800 ensures that even complex images and text are rendered with exceptional clarity. The TLP-T70M also incorporates advanced connectivity features, including wireless networking capabilities, allowing for seamless presentations from smartphones and tablets. Additionally, its built-in multimedia player can directly read files from a USB drive, offering added convenience for users who want to present without needing a connected computer.

In summary, the Toshiba TLP-S40, TLP-T60M, and TLP-T70M projectors cater to varying presentation needs, from basic to advanced features. They all leverage Toshiba’s expertise in projection technology, ensuring quality visuals and user-friendly functionality for both professional and educational applications.