Trouble indications

The indicator lights inform you of internal abnormalities.

FAN TEMP LAMP ON

No power

 

(Off)

Problem with projector

Unplug the power cord, and contact your dealer.

FAN TEMP LAMP

ON Lamp went out during use, or won’t come on

(Red lit)

(Red lit)

Lamp temperature is high so that it is difficult to turn on, the lifetime of

the lamp has ended or the projector is malfunctioning.

 

 

Unplug the power cord and wait for a short while, then turn the power back on.

If a lamp burns out, replace it with a new one.

After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down.

FAN

TEMP LAMP

ON

Power went out during use

(Green lit) (Red lit)

(Red lit)

Internal overheating, or the outside temperature is too high.

Place the projector so that the air intake and exhaust are not blocked.

 

 

 

Or

Or

 

Unplug the power cord and wait for a short while, then turn the power

(Off)

(Orange lit)

 

 

back on.

 

 

Or

 

Clean the air filter. p.39

 

 

The

icon will appear before the power goes out.

 

(Green lit)

 

After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down.

FAN TEMP LAMP

ON Power went out during use

(Red lit or flashing)

(Red lit)

Problem with internal cooling fan.

 

Unplug the power cord, and contact your dealer.

 

 

The

icon will appear before the power goes out.

 

 

Or

After approx. one minute of abnormal display, the projector returns to

(Orange lit or flashing)

 

 

the standby state waiting for internal cool down.

FAN TEMP LAMP

ON Power went out during use, or power won’t come on

(Orange

(Red lit)

The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover. p.41

flashing)

 

After approx. one minute of abnormal display, the projector returns to the standby state waiting for internal cool down.

Model with a

 

Power went out during use

document

 

Camera is not correctly connected.

camera

 

Disconnect the power plug and check the connection with the camera.

FAN TEMP LAMP

ON

The

icon will appear before the power goes out.

(Green lit)

(Red lit)

After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

 

 

PRECAUTIONS

Make sure to unplug the power cord if something goes wrong.

If the power cord is unplugged before cooling is complete, give the lamp enough time to cool before plugging it back in. If the lamp overheats, it may fail to light. Unplugging the power cord repeatedly when the temperature is high will shorten the life of the lamp. (Even if you are not concerned about lamp lifetime, the light may not come on if you do not wait at least 3 minutes.)

Before calling service personnel

If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indicationsp.42 as well.

If This Happens

 

Check

 

 

 

No power

Is the power cord plugged in? Is it connected to the projector?

 

Is the lamp cover loose? p.42

Power goes out

Is the ambient temperature high? p.42

during use

Is the air filter clogged? p.42

 

Is the air intake or air exhaust blocked? p.42

No picture

Is the projector turned on? p.24

 

Is the mute function on? p.28

 

Is the brightness setting minimized? p.32

 

Are the connections set up correctly? p.21

 

Are all the connected devices functioning properly?

 

 

 

No audio

Is the projector turned on? p.24

 

Is the mute function on? p.28

 

Is the volume setting minimized? p.25

 

Are the connections set up correctly? p.21

 

Are all the connected devices functioning properly?

 

 

 

Picture not

Is the input signal supported by the projector? p.46 , p.47

displayed

Is the correct video mode selected? p.26

correctly

Is the correct signal format selected? p.26

 

Is the selecting of computer or Y/PB/PR input correct? p.24

 

Is there something generating an abnormal video signal, for

 

 

instance the video tape?

 

 

 

Picture blurred

Is the lens dirty? p.40

Part of picture

Is the lens focus adjusted optimally? p.25

out of focus

Is the projection distance within the projector’s supported range?

 

 

p.20

 

Is the projector’s screen placement angle tilted too far? p.19

 

Are the sharpness or sampling phase adjustments off? p.26 p.32

Image is dark

Are the brightness or contrast adjustments off? p.32

 

Is the lamp nearing the end of its service life? p.30

Colors too light

Are the color, tint, R-level, G-level, or B-level adjustments off? p.32

Bad shading

Is the screen dirty?

 

Is the lamp nearing the end of its service life? p.30

Remote control

Are the remote control’s batteries drained?

doesn’t work

Are the batteries inserted into the remote control correctly? p.18

 

Is the remote control being used within the effective range? p.18

 

Are there any obstructions between the remote control and

 

 

projector?

 

Are there any fluorescent or other bright lights shining at the

 

 

projector’s infrared remote sensor?

 

 

 

Others

42

43

Page 22
Image 22
Toshiba TLP-T70M, TLP-S40, TLP-T60M owner manual Trouble indications, Before calling service personnel, Others

TLP-T70M, TLP-T60M, TLP-S40 specifications

Toshiba has been a prominent player in the projector market, offering a range of innovative and high-performance models suitable for various applications, from business presentations to educational settings. Among their standout products are the TLP-S40, TLP-T60M, and TLP-T70M projectors, each designed to meet differing user needs while incorporating advanced technologies.

The Toshiba TLP-S40 is designed for users seeking a compact yet powerful projector. Featuring a brightness of 2,400 ANSI lumens, this model ensures vibrant images even in well-lit environments. Its native SVGA resolution of 800 x 600 makes it ideal for basic presentations and visual content. Importantly, the TLP-S40 employs a 3LCD technology, which enhances color accuracy and delivers a richer visual experience without the issues of color wheel artifacts often seen in DLP projectors. The lightweight and portable nature of the TLP-S40 facilitates easy transportation, making it a popular choice for mobile professionals.

Moving up to the TLP-T60M, Toshiba ramps up performance and flexibility. This model offers a brightness of 3,000 ANSI lumens and an XGA resolution of 1024 x 768, catering to a broader range of presentation materials with sharper clarity. The TLP-T60M also incorporates Toshiba's proprietary “Eco” mode, which extends the lamp life significantly, allowing users to project for longer periods without frequent maintenance. The connectivity options are versatile, including HDMI, VGA, and USB ports, ensuring compatibility with a variety of devices. This projector is particularly favored in corporate environments due to its ability to present detailed graphics and videos clearly.

The TLP-T70M represents the pinnacle of this series, providing enhanced features and performance. With a brightness of 3,500 ANSI lumens, it excels in larger venues and rooms with substantial ambient light. The native WXGA resolution of 1280 x 800 ensures that even complex images and text are rendered with exceptional clarity. The TLP-T70M also incorporates advanced connectivity features, including wireless networking capabilities, allowing for seamless presentations from smartphones and tablets. Additionally, its built-in multimedia player can directly read files from a USB drive, offering added convenience for users who want to present without needing a connected computer.

In summary, the Toshiba TLP-S40, TLP-T60M, and TLP-T70M projectors cater to varying presentation needs, from basic to advanced features. They all leverage Toshiba’s expertise in projection technology, ensuring quality visuals and user-friendly functionality for both professional and educational applications.