Toshiba TOSHIBA 4200FA specifications System Parameters A. UPS Input

Models: TOSHIBA 4200FA

1 10
Download 10 pages 38.18 Kb
Page 4
Image 4

protection against spikes, common/normal mode noise, load steps and frequency shifts (without battery back-up capability).

3.0SYSTEM PARAMETERS A. UPS Input

1)

Input Voltage

480VAC

2)

Input Voltage Requirement

3 Phase, 3 Wire + Ground

3)

Voltage Variation

+10% to -30%

4)

Rated Frequency

50/60 Hz

5)

Frequency Range

45 - 65 Hz

6)

Power Factor

> 0.98 lagging

7)

Input Capacity

110% of UPS Output Capacity

8)

Walk-In Function

From 20% to 100% over 5 seconds

9)

Input Current Limit

125% of nominal capacity

10) Inrush Current

< 600% under synchronous condition

11) Input Current THD

< 3% Total Harmonic Distortion (THD)

12) Surge Withstandability

Meets ANSI C62.41 (IEEE 587)

13) Input Phase Rotation

Standard front-panel alarm panel shall

 

(Protection/Detection)

notify user that unit has been supplied

 

 

with incorrect phase rotation on input to

 

 

allow for correct installation. The UPS

 

 

shall be fully protected to prevent

B. UPS Output

damage from this event.

 

1)

Rated Voltage

208/120VAC

2)

Output Voltage Requirements

3 Phase, 4 Wire + Ground

3)

Output Capacity

50 kVA

4)

Rated Load Power Factor

0.8 lagging

5)

Voltage Regulation

+/- 2% nominal (balanced load)

 

 

+/- 3% nominal (unbalanced load)

6)

Voltage Adjust. Range

+/- 5% manually (by front panel user

 

 

interface)

7)

Phase Displacement

+/- 2 deg. (balanced load)

 

 

+/- 4 deg. (100% unbalanced load)

8)

Rated Frequency

50/60 Hz (jumper selectable)

9)

Frequency Regulation

+/- 0.01% free running

10) Frequency Synch. Range

+/- 0.5/1.0/1.5 Hz (+/- 1.0 Hz Standard)

 

 

User selectable

11) Frequency Slew Rate

1.0 Hz/second to 3.0 Hz/second

12) Voltage Transients

+/- 5% (100% step load change)

4200FA XT1

September 6, 2004

4

Page 4
Image 4
Toshiba TOSHIBA 4200FA specifications System Parameters A. UPS Input

TOSHIBA 4200FA specifications

The Toshiba TOSHIBA 4200FA is a high-performance hard drive designed for various computing applications, focusing on reliability and performance. It is part of Toshiba's extensive family of storage solutions, and its specifications make it particularly suited for enterprise environments where large data storage and quick access times are essential.

The 4200FA is built with advanced technology, offering a rotational speed of 4200 RPM, which strikes a balance between energy efficiency and performance. This speed is suitable for everyday computing tasks, making it a reliable choice for both personal and professional use. The drive supports SATA interface technology, ensuring compatibility with a wide range of systems and motherboards.

One of the standout features of the Toshiba 4200FA is its storage capacity. With options reaching up to several terabytes, it caters to users with substantial data storage needs, such as digital media creators, gamers, and data-heavy applications. The drive's large capacity is complemented by a high data transfer rate, allowing for rapid reading and writing of information. This efficiency is particularly beneficial for tasks that require frequent data access.

The Toshiba 4200FA also emphasizes reliability and durability. It is equipped with Shock Sensor technology, which detects excessive vibrations and automatically adjusts the drive's read/write heads, minimizing the risk of data loss due to sudden movements. Additionally, the drive is built to endure long service life cycles, suitable for 24/7 operational environments.

Another important characteristic is energy efficiency. The Toshiba TOSHIBA 4200FA is designed to consume less power than traditional hard drives, contributing to reduced overall system power requirements. This feature is especially advantageous in laptops and portable devices, extending battery life for users on the go.

In summary, the Toshiba TOSHIBA 4200FA is a robust storage solution featuring a combination of decent rotational speed, significant storage capacity, advanced technologies, and an emphasis on reliability and energy efficiency. Its design makes it a versatile choice for various applications, appealing to users who prioritize performance and data integrity in their computing experiences. With its enduring qualities, the 4200FA stands out as a dependable component for both personal and enterprise storage needs.