PREPARATION

Auto Set Up

The Auto Set Up function automatically sets the tuner channels and clock when power is first connected to the VCR.

Preparation

•Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11).

•Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.

•Press VCR to set the remote control operating the VCR.

Auto Set Up

1 Connect the antenna cable to the VCR (see page 11). Then connect the VCR’s power plug to an AC outlet.

“Auto” flashes in the VCR display as the VCR automatically tunes in all active stations. When Auto Set Up is completed successfully, the current time will be displayed.

VCR display

VCR display

 

 

PM

Tuning in progress.

Auto Set Up completed.

•If the VCR fails to set the clock, “– : – –” will be displayed. Set the clock manually. (Refer to “Setting the clock” on page 16.)

Notes

•If you press the CANCEL button, the Auto Set Up is cancelled.

•If Auto Set Up is not perform successfully, perform the clock and Tuner Channel procedures manually (page 16 to 18).

•If, however, you want to add or delete channels, refer to “Adding or erasing channels” on page 18.

1 4