Toshiba W-701, W-708 Initial Settings Using On-ScreenDisplay (continued), Setting the Clock, STOP, x2 or STOP, 3) Set “CH”, 1 Press PROG, 10 Press PROG, 2) Set “Time Zone”

Initial Settings Using On-Screen Display (continued)

Setting the Clock

Example: To set the clock to 2:30 p.m. on August 25 (summer time) 2000.

1 Press PROG..

The MENU screen appears on the TV.

2 Select “PRESET” usingFF or REW, and press ENTER.

	PROGRAM	SET UP		PRESET
	CL OCK S E T
	CH	MEMOR Y
Note	CAB L E		BOX / D S S
	GU I DE		CH
“GUIDE CH” is for
	EnD: PROG			ENTER
W-708 only.

3 Press ENTER to select “CLOCK SET”.

PROGRAM SET UPPRESET

	CL OCK		S E T
		SUMMER		T I ME
			T I ME	DA T E Y E AR
		OUT	12 : 0 0AM1 / 0 1 ’ 00 SA
	MANU
EnD:		PROG

4 Select “AUTO” or “MANU” usingPLAY/

x2 or STOP.

AUTO: The VCR automatically sets or adjusts the clock.

If you select “AUTO” mode, proceed to step8. MANU: You can set the clock manually.

If you select “MANU” mode, select “SUMMER TIME” using FF. Set to “IN” or “OUT” for the summer (daylight saving) time using PLAY/x2 or STOP. (For “IN” and “OUT” selections, see the description in step 9.)

5 Move to the next using FF.

(To move back, press REW.)

6 Vary the digits to set the hour.

PLAY/x2: To increase.

STOP: To decrease.

7 Repeat steps 5 and 6 to set the minutes, month, day, and the year (by the last two digits).

Proceed to step 10 to start the clock.

8 Press ENTER to start the “AUTO” clock set feature.

After a while, the VCR automatically updates the clock using the data broadcast by the local TV stations.

The following screen will appear on TV depending on the broadcast at your location.

PROGRAM SET UP PRESET

CL OCK S E T
	SUMMER T I ME
		T I ME Z OnE	CH
		I n AUTOEAS T ERn	AUTO 2
AUTO	AUTO

	T I ME DA T E Y EAR
	9 : 5 7AM1 / 0 1 ’ 00 SA
EnD: PROG	ENTER

9 Select the options using FF or REW. Change the data using PLAY/x2 or

STOP.

1)Set “SUMMER TIME (Daylight- Saving Time)”.

IN, daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember that any part of a scheduled Timer Recording that falls between these two times will not be recorded.

OUT, daylight-saving time ends on the last Sunday in October. The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can affect your recording length if one is set for this time.

2) Set “Time Zone”.

If you select “AUTO” for your time zone, the VCR sets the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select another time zone or use the “MANU” option.

3) Set “CH”.

If you don't know the clock data channel, select “AUTO”. The VCR will scan automatically to tune the channel carrying the clock data.

If AUTO CLOCK SET is unsuccessful, set the time and date through the “MANU” clock set menu selection.

10 Press PROG..

Now the clock starts.

11 Press PROG. to exit.

1 6