RECORDING
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
•Select the video channel (3 or 4) or video input mode on the TV.
•Make sure that the clock is set correctly (page 15).
•Store the channels on the VCR (pages 16 and 17).
•If you record cable channels, finish the cable box
•If you record satellite channels, finish the DSS® satellite receiver
POWER
VCR TV
CH/TRK
1 2 3
4 5 6
TV VOL
7 8 9
I.SELECT
0 100
DISPLAY COUNTERREMAIN/ COUNT RESET TV/ VCR
SP/ SLP 
REC 
TIMER
SLOW | PLAY/x2 | PAUSE/STILL |
| CURSOR |
|
REW | F F | |
| STOP |
|
PROG. | CANCEL | ENTER |
| CABLE BOX | |
VCR Plus+ | A.SELECT | CH |
EJECT | CM SKIP | POWER |
Number buttons
10
FF
PLAY/x2
STOP
ENTER
REW
2,9
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from 9:20 p.m. until 10:00 p.m. on August 30. Today is August 25.
1 Load a cassette with the safety tab attached.
2 Press PROG. to display the MENU screen.
3 Select “PROGRAM” usingFF or REW, and press ENTER.
4 Move to the next using FF, and select the channel number 25 by pressing number buttons 2 and 5, PLAY/x2 or STOP.
•To record a cable program from the connected cable box:
Enter the cable channel number by number buttons, PLAY/x2 or
STOP.
If your cable box is not
•To record a satellite program from the connected DSS® satellite receiver:
Enter the satellite channel number (100 to 999) by number buttons, PLAY/x2 or STOP. (If a number 1 to 99 is entered, the VCR will record a TV/CATV program on the channel, not a satellite’s.)
If your DSS® satellite receiver is not
•You can make “L1” or “L2” appear on the channel number position by pressing I.SELECT depending on your connection.
(See pages 8 and 12 ).
To make corrections:
Press REW to move back to the item, or FF to forward.
(Continued)
RECORDING
25