Cable Box Set-up (continued)
7 Select “BRAND TYPE” usingSTOP, and enter a brand code of your cable box using number buttons. Refer to the table on the next page.
Example: For a TOSHIBA cable box, identified by number 36.
Cable box display
VCR display
EnD : PROG | Cable channel number |
Make sure that the channel display of your cable box has changed to
36.If not, try each brand code assigned to the brand of your cable box until the display changes to 36.
If it still holds;
• Relocate the cable box on the VCR.
• Use each of digits from 1 to 91.
8 Press PROG. twice to exit.
Notes
•If your cable channel does not change to 9 in step 7, the cable box will not be able to change channels in the timer recording. In this case, set “CONTROL” to “OFF” in step6.
•The cable box control is not compatible with the DSS® satellite receiver control.
Buttons to control a remote- controllable cable boxOnce you complete the
To turn the cable box on or off.
•CH (CABLE BOX)To select cable channels in the upper or lower direction. (not applicable to some brands of cable box.)
•Number buttons (0 – 9)To select desired channels to record.
•100Some cable boxes require you to use this button as the enter button. Press this button after selecting the cable channel with number buttons.
34