Video Input Source Selection
Menu Operation
1 | Press the MENU button to display the |
| the Point ▲▼ buttons to select Input and then press the |
| Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select the desired input and |
| then press the Point ► button to access the submenu items. |
3 | Use the Point ▲▼ buttons to select the desired source and |
| then press the SELECT button. |
When connecting to video equipment, select the type of Video source in the Source Select Menu.
When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).
When the video signal is connected to the HDMI terminal, select HDMI.
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting to video equipment, select the type of Video source in the Source Select Menu.
|
| When the video input signal is connected to the |
Video |
| |
| VIDEO jack, select Video. | |
|
| |
| When the video input signal is connected to the | |
Y,Pb/Cb,Pr/Cr | ||
|
|
Note:
•When the video input signal is connected to the
•Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/ Cr input source, set to RGB input manually.
INPUT 3 MENU
When connecting to video equipment, select the type of Video source in the Source Select Menu.
Y,Pb/Cb,Pr/Cr
When the video input signal is connected to the VIDEO jack, select Video.
When the video input signal is connected to the
When the video input signal is connected to the
35