Video Input
Keystone | Keystone |
This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust.
Standard
Adjust the Horizontal/Vertical keystone distortion of the projected image.
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue, and Off.
Store
Store........ Keep the keystone correction even when the AC
power cord is unplugged.
Reset....... Release the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point ▲▼◄► buttons to correct the Standard or Corner distortion. (p.31)
Ceiling
When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a
Ceiling |
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Screen aspect
This function is used to project the image to a 4:3 or 16:9 or projection screen.
Default (16:10) ....16:10 is the aspect of the LCD panel. The
orignal Screen Menu is available.
16:9 ..... Set to a 16:9 projection screen.
4:3 ..... Set to a 4:3 projection screen.
Reset
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”
Rear |
Note:
-When the 16:9 function is selected, Wide(16:9) is not available in the PC and AV screen
-When the 4:3 function is selected, Natural wide is not available in the AV screen (p.49).
50
