Sanyo PLC-WM5500, WM5500L Installation, Positioning the Projector, Lens Shift Adjustment, Note

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-WM5500)

Note:

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

			80.1' (24.4 m)			(Inch Diagonal)
			47.2’(14.4 m)
		35.4’(10.8 m)					400”
					400”	Max. Zoom
		23.6’ (7.2 m)		300”
	11.8’ (3.6 m)
			200”		250”	Min. Zoom
4.5'(1.4 m)
		100”	125”	188”
		40”
		63”				(Center)

Screen Size	40”	100”	200”	300”	400”
(W x H) mm
	862 x 538	2154 x 1346	4308 x 2692	6462 x 4039	8616 x 5385
16:10 aspect ratio
Zoom (max.)	4.5'(1.4 m)	11.8’ (3.6 m)	23.6’ (7.2 m)	35.4’(10.8 m)	47.2’(14.4 m)
Zoom (min.)	7.9'(2.4 m)	19.7' (6.0 m)	40.0' (12.2 m)	60.0' (18.3 m)	80.1' (24.4 m)

Lens Shift Adjustment

Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 27)

The display position can be shifted upward up to 60% elevation of the display.

When the lens is shifted to top.

The display position can be shifted to the left in up to 10% width of the display.

The display position can be shifted downward up to 60% low level of the display.

When the lens is shifted to bottom.

The display position can be shifted to the right in up to 10% width of the display.

Lens shift adjustable range

60%

10%

When the lens is shifted to leftmost. When the lens is shifted to rightmost.

Lens shift center position Shift range

17