Computer Input
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 10 and press the SELECT button.
A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image
Store
A confirmation box appears and then select Yes.
Select the desired screen size that conforms to the input signal source.
1 | Press the MENU button to display the |
the Point ▲▼ buttons to select Screen and then press the | |
| Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons select the desired item and then |
press the SELECT button. |
Normal
Provide the image within a screen size keeping its original aspect ratio.
Full
Provide the image to fit full screen size.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.
True
Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
Custom
Provide the last stored aspect screen image.
Note:
•The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector.
•The image data other than 1280x 800 is modified to fit the screen size in initial mode.
•Full, Wide(16:9), Zoom, True and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.36)
42