Sanyo WM5500L Input Selection Computer Input Source Selection, Menu Operation, Note, Input Menu

Input Selection

Computer Input Source Selection

Menu Operation

INPUT MENU

1	Press the MENU button to display the On-Screen Menu. Use
	the Point ▲▼ buttons to select Input and then press the
	Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select the desired input and
	then press the Point ► button to access the submenu items.
3	Use the Point ▲▼ buttons to select the desired source and
	then press the SELECT button.

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

RGB(PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

Note:

Input source changes if the INPUT 1 button on the remote control is pressed.

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

INPUT 1 MENU

INPUT 2 MENU

Input 1

RGB(PC analog) RGB(Scart)

HDMI

Y,Pb/Cb,Pr/Cr

34