Sanyo WM5500L, PLC-WM5500 owner manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 76-78.

Main Menu Sub-Menu





















Input

Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).

Note: Network will be not displayed when optional PJ-Net Organizer is not attached.

PC adjust

Used to adjust the parameters to match with the input signal format (pp.37-39).

Image select

For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10(p.40).

For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and Image 1-10(p.46).

Image adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp../White balance (R/G/B)/ Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).

For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp../White balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).

Screen

For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom adj../ Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).

For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural Wide/Custom/ Custom adj../Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).

Sound

Used to adjust the volume or mute the sound (p.28).

Setting

Used to set the projector’s operating configurations (pp.51-65).

Information

Display the input source information: Input, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO.. (p.29).

Network

See the owner’s manual of “Network Set-up and Operation”.

Guide

The key operation is displayed.

26