Sanyo PLC-WM5500, WM5500L Video Input, Video System Selection, Video Jack or S-video Jack, Note

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen Menu. Use	AV System Menu (Video or S-video)
	the Point ▲▼ buttons to select Input and then press the Point
	► or the SELECT button.
2	Use the Point ▲▼ buttons to select System and then press the
	Point ► or the SELECT button.
3	Use the Point ▲▼ buttons to select the desired system and
	then press the SELECT button.

Video Jack or S-video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43, PAL-M, and PAL-N.

Y, Pb/Cb, Pr/Cr Jacks

Auto AV System Menu (Y, Pb/Cb, Pr/Cr)

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

When the Video System is 1035i, 1080i or 1080p, select the system manually.

Y, Pb/Cb, Pr/Cr SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i, and 1080p.

Note:

The AV System Menu cannot be selected when selecting

RGB (Scart).

45