Appendix

– Filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 67-68)

appears on the screen

 

 

– Adjust the focus of the projector.

 

– Check Projection Lens to see if it needs cleaning.

 

Note: Moving the projector from a cool temperature location to a warm temperature

The image is out of focus..

location may result in moisture condensation on Projection Lens. In such

cases, leave the projector OFF and wait until condensation evaporates.

 

 

–  Projecting from excessive slant angle to the screen may cause keystone distortion

 

and partial imperfect focus.

 

– Make sure the projection screen is at least 4.3’ (1.3 m) away from the projector.

 

 

 

– Check if Contrast or Brightness is adjusted properly. (See pages 41, 47)

The image is not bright

– Check if Image level is selected properly. (See pages 40, 46)

– Check the Lamp control function. ( See “Setting” section on page 57)

enough..

– Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching.

 

 

Replace the lamp with a new one promptly. (See page 69)

 

 

The color is strange..

– Check the Input signal, color system, video system, or computer system mode.

– Adjust the Image Level properly. (See pages 40, 46)

 

The image is Left/Right

– Check the Ceiling / Rear function. (See pages 44, 50)

reversed..

 

The image is Top/Bottom

– Check the Ceiling function. (See pages 44, 50)

reversed..

 

The image is distorted or

– Check PC adjust Menu or Screen Menu and adjust them.

runs off..

 

Auto PC adjustment

– Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,

720p, 480i, 575i, 1035i, 1080i or 1080p is selected or or when the digital signal is

function does not work.

input into HDMI terminal. See page 37.

 

Some displays are not

– Check the Display function. (see page 52)

seen during the operation..

The setting does not

– Make sure you selected Store after adjusting settings. Some settings cannot be

remain after turning off

stored if not registered with Store function.

power..

 

Power management

– Power management function cannot work while Freeze function is running or the

function does not work..

shutter is closed.

Image disappears

– Check the power management function in the Setting. The power management is set

automatically..

to On at the factory.

Capture function does not

– Check the connection to see if there is signal.

work..

–Capture function is not available when the Picture in Picture function is set to User1-5.

Some menus cannot be

– Each of the Video Input and Computer Input has a limit on selectable menus.

selected..

 

 

– Check the audio cable connection from audio input source.

 

– Adjust the audio source.

No sound

– Press the Volume + button. ( See page 28)

– Press the Mute button. (See page 28)

 

 

– Is the image projected? You will hear the sound only when the image is projected.

 

– Check the Build-in SP function. (See page 28)

74

Page 73 Page 75
Page 74
Image 74
Sanyo WM5500L, PLC-WM5500 owner manual Appendix
Page 73 Page 75

PLC-WM5500, WM5500L specifications

The Sanyo WM5500L, also known as PLC-WM5500, is a high-performance projector designed to deliver exceptional image quality and versatility for various applications, including business presentations, educational use, and home entertainment. This projector integrates cutting-edge technology with user-friendly features, making it a popular choice among professionals and casual users alike.

One of the standout features of the Sanyo WM5500L is its impressive brightness. With a brightness rating of 5000 ANSI lumens, this projector is capable of delivering clear and vivid images, even in well-lit environments. This makes it an ideal choice for large venues such as auditoriums, conference rooms, and classrooms, where ambient light can be a challenge. The high brightness level ensures that images remain sharp and easy to read, regardless of the lighting conditions.

The projector employs advanced LCD technology, which is known for producing true-to-life colors and excellent contrast ratios. The Sanyo WM5500L features a resolution of 1024 x 768 pixels (XGA), providing a good balance between image detail and performance. The combination of high brightness and effective color reproduction makes it suitable for displaying presentations, videos, and images with a high degree of clarity and vibrancy.

Another notable characteristic of the WM5500L is its connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect various devices such as laptops, Blu-ray players, and gaming consoles easily. This versatility ensures compatibility with a wide range of audio-visual equipment, making it an excellent choice for diverse usage scenarios.

In addition to its excellent image quality and connectivity, the Sanyo WM5500L is designed with user convenience in mind. It features adjustable lens shift capabilities, ensuring that users can position the projector flexibly without compromising image quality. The built-in 10-watt speaker enhances the audio experience, making it suitable for presentations that require accompanying sound without the need for external speakers.

Finally, the reliable durability of the Sanyo WM5500L, coupled with its energy-efficient design, ensures that users enjoy a long-lasting, cost-effective projection solution. Overall, the Sanyo WM5500L (PLC-WM5500) stands out in the market as a powerful, reliable projector that meets the diverse needs of its users, combining advanced technology, high-quality imaging, and ease of use. This projector is undoubtedly a valuable addition to any professional or educational setting.
Top Page Image Contents