Sanyo WM5500L, PLC-WM5500 Installation Connecting to Video Equipment Video, S-video, HDMI

Installation

Connecting to Video Equipment (Video, S-video, HDMI)

Cables used for connection ( = Cables not supplied with this projector.)

•Video cable (RCA x 1 or RCA x 3) 

•BNC cable (BNC x 1 or BNC x 3) 

•S-video cable 

•Scart-VGA cable 

•HDMI cable 

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Analog Out Signal Table

	Input Terminal		Monitor Out	Cable
	D-sub15	RGB (PC analog)	YES
Input 1		RGB (SCART)	NO
	HDMI	HDMI	NO
		RGB	YES
Input 2	5 BNC	Video	YES	
		Y, Pb/Cb, Pr/Cr	YES	
	RCA	Y, Pb/Cb, Pr/Cr	YES	
Input 3	S-video	S-video	NO
	Video	Video	YES	
Network			NO

A cable with one end D-sub 15 and the other end (Black box) compatible with each equipment is necessary.

	Component			S-video	RGB Scart
Composite Video Output		Component	Composite
Video	(Y, Pb/Cb, Cr/Pr) Video Output		Video	Output	21-pin Output HDMI Output

BNC	RCA
cable	cable

Refer to the AnalogOut Signal Table (above).

S-video cable

Scart-

VGA HDMI

cable cable

Video Y - Pb/Cb - Pr/Cr Y - Pb/Cb - Pr/Cr Video ANALOG OUT S-VIDEO ANALOG IN HDMI

20