Pioneer PDP 433CMX Screen Size Selection, Press SCREEN SIZE to select the size, PDP-503CMX, Full

Operations

Screen Size Selection

This unit incorporates screen modes of various height and width ratios. For optimal viewing, we recommend that you select the screen mode that best matches the video source that you are viewing. Although these modes are designed for full display of a picture on a wide screen, it is our hope that you make use of them with a full understanding of the manufacturer’s intentions.

Changing the screen size

The size of the image displayed on the screen, and the range of the image shown can be set in one of four modes on the PDP-503CMX, and in three modes on the PDP-433CMX.

Press SCREEN SIZE to select the size.

The screen size changes each time SCREEN SIZE is pressed as follows.

[PDP-503CMX]

3 DOT BY DOT		3 4:3
	PARTIAL 2
			FULL 2

[PDP-433CMX]

3 DOT BY DOT	3 4:3
		FULL 2

Consult the table Computer Signal Formats Supported (pages 35 and 36) for information regarding screen sizes supported by each signal format.

Notes

÷When the PARTIAL or FULL setting is used to display a non- wide screen 4:3 picture fully on a wide screen, a portion of the picture may be cut off or appear deformed.

÷Be aware that when the display is used for commercial or public viewing purposes, selecting the PARTIAL or FULL mode settings may violate the rights of authors protected under copyright law.

÷When DOT BY DOT or 4:3 screen sizes are selected, the display position is moved slightly each time the power is turned on, in order to prevent image burning.

During personal computer signal input

1DOT BY DOT

The input signal and the screen maintain a dot to line ratio of 1:1 and is thus highly faithful to the source.

[PDP-503CMX]

A
	480 lines
		768 lines

640 dots

1280 dots

(Illustration shows 640 x 480 input.)

[PDP-433CMX]

*The PDP-433CMX is designed with horizontally oblong elements, with the result that the image displayed will appear more oblong than the original input signal.

A
	480 lines
		768 lines

640 dots

1024 dots

(Illustration shows 640 x 480 input.)

24:3

The display fills the screen as much as possible without altering the aspect ratio of the input signal.

A

3FULL

The display is presented with a widescreen aspect ratio of 16:9 and fills the entire screen.

A

21

English

Operations

En