Installation and Connections

English

Installation and Connections

Installation of the Unit

Installation using the supplied display stand

Be sure to fix the supplied stand to the installation surface.

Use commercially available M8 bolts that are 25 mm longer than the thickness of the installation surface.

1Fix the supplied stand to the installation surface at each of the 4 prepared holes using commercially available M8 bolts .

Front

PDP-503CMX: 798 mm (31-7/16in.)

PDP-433CMX: 768 mm (30-1/4in.)

Rear

110 mm (4-5/16in.)

2 Set this unit in the stand.

3 Fix this unit using the supplied washer and bolt.

Use a 6 mm hex wrench to bolt them.

CAUTION

This display unit weighs at least 67 lbs (30 kg) and has little front- to-back depth, making it very unstable when stood on edge. As a result, two or more persons should cooperate when unpacking, moving, or installing the display.

Page 16

Image 16

Pioneer PDP 503CMX Installation and Connections, Installation of the Unit, Installation using the supplied display stand

Contents

PDP-503CMXPDP-433CMX English Operating Instructions Safety Precautions Safety Precautions Important Safety Instructions Iii Contents Features How to Use This Manual Before ProceedingScreen Displays Example of PDP-503CMX Screen Display Press 5/∞/2/3 to adjust the value Press 5/∞ to select the item to be adjustedAbout operations in this manual Before Proceeding Press Menu to display the menu screen Checking Supplied Accessories Part Names and Functions Main UnitMain unit Operation panel on the main unit Inserting the batteries Remote control unit Remote Control UnitWhen handling the remote control unit Operating range of the remote control unit Connection Panel Illustration depicts PDP-503CMX model ~ Speaker L terminalAudio Input Stereo mini jack Audio Output Stereo mini jack Installation and Connections Installation of the UnitInstallation using the supplied display stand Installation and Connections Wall-mount installation of the unit Rear view diagram PDP-503CMXRear view diagram PDP-433CMX Side view diagram When connecting to INPUT2 Connection to INPUT1 and INPUT2Connection to a personal computer Connection of separate Sync analog RGB Source When connecting to INPUT2 When connecting to Output INPUT1 When connecting to INPUT1Connection of G on Sync analog RGB source Connecting the speakers Audio ConnectionsConnection of composite Sync analog RGB Source Making connections to the audio inputs on this unit Power Cord Connection Control Cord Connection To attach the speed clamps to the main unit How to Route CablesTo remove speed clamps Setting Up the System Setup after ConnectionScreen Mode setup Press 2/3 to select SET UP Clamp Position setup Setup of Clamp PositionSetting Up the System Press SET to select Locked Press STANDBY/ON to put this unit in the operation mode OperationsSelecting an Input Source Before you begin, make sure you have To adjust the volume Press Volume on the remote control unitPress Muting on the remote control unit Press Display on the remote control unit During personal computer signal input Screen Size SelectionChanging the screen size Press Screen Size to select the size Moving the screen position upward or downward Supported only on PDP-503CMX Partial Image Enlargement Automatic Power OFF Press 5/∞ to select either the PowerManagement or Auto Power OFF mode When using Input Adjusting the Picture Quality Display Panel AdjustmentsTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Display Panel Adjustments To reset Screen mode settings to the default Other Operations Rewriting the Input DisplayOther Operations Press SET to select Input Label Power Control Function Press SET to select Power ControlPress 2/3 to select Option Press Menu Other Operations Press SET to select Input Audio Output Audio OUTPress 5/∞ to select Audio OUT Cleaning TroubleshootingAbout the self diagnosis mode Additional Information General problems Problems commonly mistaken as breakdown Panel sticking and after-image lag STANDBY/ON indicatorAdditional cautions Accessories General PDP-503CMXGeneral PDP-433CMX Input/output PC signal compatibilty table INPUT1, INPUT2 Supplement 1 -1/2 PDP-503CMXInformation Additional Supplement 1 -2/2 PDP-433CMX Supplement Explanation of Terms Pin No Input Output

Pioneer PDP 503CMX, PDP 433CMX Installation and Connections, Installation of the Unit

Models: PDP 503CMX PDP 433CMX

Installation and Connections

Installation and Connections

Installation of the Unit

Installation using the supplied display stand

Use a 6 mm hex wrench to bolt them.