Pioneer PDP 433CMX Remote Control Unit, When handling the remote control unit, SCREEN SIZE button

Part Names and Functions

Remote Control Unit

1SCREEN SIZE button

Press to select the screen size (page 21).

1	7		2 INPUT buttons
			Use to select the input (page 19).
2		8	3 MENU button
	9
			Press to open and close the on-screen menu
			(pages 17 to 30).
			4 ADJUST (5/∞/3/2) buttons
3	0		Use to navigate menu screens and to adjust various settings on the
			unit.

	Usage of cursor buttons within operations is clearly indicated at the
4	bottom the on-screen menu display (pages 17 to 30).
5	5 SET button
	Press to adjust or enter various settings on the unit (pages 17 to 30).

6MUTING button

6 - Press to mute the volume (page 20).

7AUTO SET UP button

When using computer signal input, automatically sets the POSITION and CLOCK/ PHASE to optimum values (page 26).

	8 STANDBY/ON button
	Press to put the unit in operation or standby mode (page 19).
When handling the remote control unit	9 DISPLAY button
¶ Do not drop or shake the remote control.	Press to view the unit’s current input and setup mode (page 20).
¶ Do not use the remote control unit in a location
subject to direct sunlight, heat radiation from a	0 POINT ZOOM button
heater, or in a place subject to excessive
humidity.	Use to select and enlarge one part of the screen (page 23).
¶ When the remote control unit’s batteries begin
to wear out, the operable distance will gradually	- VOLUME (+/–) buttons
become shorter. When this occurs, replace all	Use to adjust the volume (page 20).
batteries with new ones as soon as possible.

Inserting the batteries in the	CAUTION
remote control unit
	¶ Insert batteries so that the plus (+) and minus (–) sides are
	aligned according to the markings in the battery case.
While pressing down lightly, slide	¶ Do not mix new batteries with used ones.
	¶ The voltage of batteries may differ even if they are the same
in the direction of the arrow.
	shape. Please do not mix different kinds of batteries
	together.
	¶ When not using the remote control unit for a long period of
	time (1 month or more), remove the batteries from the
Two AA (R6)	remote control unit to prevent leaking of battery fluid. If
	battery liquid has leaked, thoroughly wipe the inside of the
batteries	case until all liquid is removed, and then insert new batteries.
	¶ Do not charge, short, disassemble or throw the provided
	batteries in a fire.
	When disposing of used batteries, please comply with
	governmental regulations or environmental public
	instruction’s rules that apply in your country or area. H048 En

7

English

Part Names and Functions

En