Other Operations
English
Other Operations
4Press SET to select INPUT 1.
The factory default setting is OFF. Each time SET is pressed the selector function switches alternately as shown:
3OFF INPUT1 2
÷When OFF is selected, AUTO FUNCTION is disabled.
÷When INPUT 1 is selected, the display input automatically switches to INPUT 1 when a signal is detected at the INPUT 1 jack. Thereafter, the input will not change even if the INPUT button is pressed on the remote control unit or display.
Once the function has switched to INPUT 1 by operation of the AUTO FUNCTION facility, if the input signal is no longer detected at the INPUT 1 jack, the function will automatically switch back to the original input source used before the AUTO FUNCTION facility was enabled.
5Following completion of settings, press MENU again to return the display to its normal screen.
Note
The AUTO FUNCTION for INPUT1 is supported only when a separate SYNC or composite SYNC analog RGB signal is input. (When a G on SYNC or component video signal is input, AUTO FUNCTION is disabled.)
Audio Output (AUDIO OUT)
The signal level produced at the AUDIO OUT jack can be set to FIXED or VARIABLE (linked to the VOLUME) as desired.
1Press MENU.
The onscreen menu will be displayed.
MAIN MENU |
|
|
|
|
| INPUT1 |
PICTURE | SCREEN | SET UP | OPTION | |||
C O N T R A S T |
| : | 0 |
|
|
|
BR I GHT . |
| : | 0 |
|
|
|
R. L E V E L |
| : + 6 0 |
|
|
| |
G. L E V E L |
| : + 6 0 |
|
|
| |
B. L E V E L |
| : + 6 0 |
|
|
| |
H. E NHAN CE | : | 0 |
|
|
| |
V . E NHAN CE | : | 0 |
|
|
| |
RE S E T |
|
|
|
|
|
|
SELECT |
| SET | ENTER | MENU | EXIT | |
2Press 2/3 to select OPTION.
MAIN | MENU |
|
|
|
| INPUT1 |
PICTURE | SCREEN | SET UP | OPTION | |||
|
| POWE R C ON T R OL | : S T A ND A RD | |||
|
| AUT O | F U NCT I O N | : OF F |
| |
|
| A UD I O O UT | : F I X E D | |||
| SELECT | SET | CHANGE | MENU | EXIT | |
3Press 5/∞ to select AUDIO OUT.
MAIN | MENU |
|
|
|
| INPUT1 |
PICTURE | SCREEN | SET UP | OPTION | |||
|
| POWE R CON T R OL | : S T A ND ARD | |||
|
| AUT O | F U NCT I O N | : OF F |
| |
|
| A UD I O OUT | : F I X E D | |||
| SELECT | SET | CHANGE | MENU | EXIT | |
4Press SET to select the desired audio level setting. The factory default setting is FIXED. Each time SET is pressed, the function alternates as shown:
3FIXED VARIABLE 2
÷When FIXED is selected, the audio output volume will not change, even if the setting of the display’s VOLUME function is later changed.
÷When VARIABLE is selected, the level of the output signal changes in accordance with the setting of the VOLUME function.
5Following completion of settings, press MENU to return to normal screen display.
Note
The AUDIO OUT setting affects all input sources.
30
En
