Function of remote control
Direct Access TuningEntering the frequency and tuning.
1Select the bandPress the [FM] or [AM] button.2Enter Direct Access Tuning modePress the [DIRECT] button on the remote control."– – –
Example:
Desired frequency | Press button |
92.1 MHz (FM) | [0], [9], [2], [1] |
810 kHz (AM) | [0], [8], [1], [0] |
Press the [DIRECT] button on the remote control.
Station Preset MemoryPutting a station in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].
3Put the frequency in the memoryPress the desired [1] — [6] button for at least 2 seconds.The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button.
Putting stations with good reception in the memory automatically.
1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].
2Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memory Auto Memory Entry closes.
Preset TuningRecalling the stations in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Recall the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.
The original setting is FM band 50 kHz, and AM band 9 kHz.
1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency stepWhile pressing the [1] and [5] buttons, press the [SRC] button.Release the [SRC] button first. After the display appears, release your fingers from the [1] and [5] buttons.
The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
•When the same operation is repeated, the frequency step returns to the original setting.
•When the frequency step is changed, the frequencies in the memory are deleted.
English 13