Toyota 86120-YZA59 Display, Setting, Display, Setting, Display, Setting, Display, Setting, AMP Control, Supreme Setting, Built-inAmp Setting, B.M.S. Frequency Offset

Menu system

In Standby mode

Built-in Amp Setting

Controlling the built-in amplifier.

Turning OFF this control enhances the preout quality.

Display	Setting
"AMP ON"	The built-in amplifier activates.
"AMP OFF"	The built-in amplifier deactivates.

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.

Display	Setting
"SPRM ON"	Plays sound using the Supreme function.
"SPRM OFF"	Plays the original sound stored in the audio file.

•The sound effect may be imperceptible depending on the relationship between the audio file format and setting.

Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external amplifier using the main unit.

Display	Setting
"BMS FLAT"	Bass boost level is flat.
"BMS +6"	Bass boost level is low (+6dB).
"BMS +12"	Bass boost level is mid (+12dB).
"BMS +18"	Bass boost level is high (+18dB).

•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.

•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.

When an amplifier that can only be set to +12 is connected to the unit, "BMS +18" will not work correctly even if it is selected.

Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.

Display	Setting
"BMSF NML"	Boost with the normal central frequency.
"BMSF LOW"	Drop the normal central frequency 20%.

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

1Select AMP Control modePush the Control knob towards [FM] or [AM]. Select the "AMP CTRL" display.2Enter AMP Control modePress the Control knob for at least 1 second.

3Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM].

•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.

4Adjust the AMP Control item

Push the Control knob towards [4] or [¢].

5Exit AMP Control mode Press the [MENU] button.

•You cannot use the LX AMP operation during standby mode.

22 English