In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display

Setting

"BEEP ON"

Beep is heard.

"BEEP OFF"

Beep canceled.

In Standby mode

Manual Clock Adjustment1Select Clock Adjustment modePush the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.
Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"DISP ON"

Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

•When the display is off, pressing any key will turn on the display.

•When the display is off, you cannot perform any operation except for the following:

•Volume

•Attenuator

•Selecting the source

•Ejecting the disc

•Turning off the power

•During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"DIM ON"

The display dims.

"DIM OFF"

The display doesn’t dim.

In Standby mode

Switching preout

Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)

Display

Setting

"SWPRE R"

Rear preout.

"SWPRE SW"

Subwoofer preout.

English 21