TP-Link TD-8816 manual Snmp, UPnP, To add a URL filter entry

TD-8816

ADSL2/2+ Ethernet Router User Guide

To add a URL filter entry:

For example: If you want to forbid the user to access the website: www.sina.com. Presume the rule is aimed at the interface PVC0, and its index is “1”.

Step 1: Select the “URL Filter” as the Filer Type Selection (show in Figure 4-30).

Step 2: Select the Index for the rule, and then enter the website in the URL field.

Step 3: Finally, Select Yes to active the rule, and then click the SAVE to save the entry.

Other configurations for the entries as shown in Figure 4-27:

Enter the URL Index to view or modify the entry.

Enter the URL Index to locate the specific rule, and then click the DELETE button to delete the entry.

4.5.3 SNMP

Choose “Access Management→SNMP”, you can see the SNMP screen. The Simple Network Management Protocol (SNMP) is used for exchanging information between network devices.

Figure 4-31

¾Get Community: Select to set the password for the incoming Get and Get next requests from the management station.

¾Set Community: Select to set the password for incoming Set requests from the management station.

4.5.4 UPnP

Choose “Access Management→UPnP”, you can configure the UPnP in the screen (shown in Figure 4-32).

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN.

39